The 250cc buggy is a versatile, compact on/off-road vehicle that can seat two persons. It is powered by a 244cc, 172mm, single, four-stroke, water cooled engine, generating an output of 10.6 kw at 6500 RPM and a torque of 18.4 N-m at 5000 RPM. The bore is 72 mm and the stroke is 60 mm. The vehicle has a compressive ratio of 10:1. Fuel economy is enhanced through the use of a capacitor discharge ignition (CDI) system. The vehicle has automatic transmission, using the continuously variable transmission technology that does not incorporate a fixed gear ratio. The air-fuel merging in the engine is controlled through a constant vacuum diaphragm carburetor. As with any vehicle having an open body, safety is an important consideration. The frame of the buggy is reinforced to withstand shocks and the front and rear adjustable hydraulic suspensions are also adequate to absorb the impact on rough roads. The weight distribution ensures a low center of gravity for greater stability. The 19 x 7-8 front wheel and the 22 x 10-10 rear wheel, both tires having a pressure of 120 k Pa, offer proper traction on all road surfaces. In addition to the standard 3 wheel hydraulic brakes, there is also an emergency brake. The four point harness seats are comfortable and the angle of inclination coupled with the location of the wrapped steering wheel make for an efficient driving position. The dimensions of the vehicle are approximately 2240 mm x 1300 mm x 1450 mm. The seat height is around 550 mm, the wheelbase is 1515 mm, and the ground clearance is 160mm. The weight of the vehicle is 595 pounds and the fuel tank capacity is around 2.27 gallons. Customers have an option of a canvas top for the vehicle.